Volume Music Solutions | Call: 0128 0853640 | Email: info@volumemusicsolutions.co.uk

Dynacord SL 2400 2 x 1200 w Power Amplifier

£1,149.00 Excl. VAT

Dynacord     

 

Dynacord SL 2400 2 x 1200 w Power Amplifier

 

Solid Dynacord amplifier technology at highly competitive prices.

These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.

The integrated, switchable Low-Pass Notch filter (a typical Dynacord special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

SPECIFICATIONS

Load Impedance 2 Ω 4 Ω 8 Ω
Maximum Midband Output Power THD = 1%, 1 kHz, Dual Channel 1800 W 1200 W 750 W
Rated Output Power THD < 0.1%, 20 Hz to 20 kHz 1100 W 550 W
Maximum Single Channel Output Power Dynamic-Headroom, IHF-A 3400 W 1800 W 950 W
Maximum Single Channel Output Power Continuous, 1 kHz 2400 W 1500 W 850 W
Maximum Bridged Output Power THD = 1%, 1 kHz 3600 W 2400 W

SPECIFICATIONS

Maximum RMS Voltage Swing THD = 1%, 1 kHz 90.6 V
Power Bandwidth THD = 1%, ref. 1 kHz, half power @ 4 Ω < 10 Hz to 30 kHz
Voltage Gain, ref. 1 kHz 32.0 dB
Input Sensitivity rated power @ 8 Ω, 1 kHz +6.6 dBu (1.66 Vrms)
THD at rated Output Power MBW = 80 kHz, 1 kHz < 0.03%
IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
DIM30, 3.15 kHz, 15 kHz < 0.05%
Maximum Input Level +21 dBu (8.69 Vrms)
Crosstalk ref. 1 kHz, at rated output power < -80 dB
Frequency Response, ref. 1 kHz 10 Hz to 40 kHz (±1 dB)
Input Impedance, active balanced 20 ㏀
Damping Factor, 1 kHz > 300
Slew Rate 30 V/μs
Signal to Noise Ratio A-weighted > 110 dB
Output Noise, A-weighted < -71 dBu
Output Stage Topology Class H
Power Requirements 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption 1/8 maximum output power @ 4 Ω 850 W
Mains Fuse 240 V / 230 V: T15AH; 120 V / 100 V: T30AH
Protection Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
Cooling Front-to-rear, 3-stage-fans
Ambient Temperature Limits +5 °C to +40 °C (40 °F to 105 °F)
Safety Class I
Dimensions (W x H x D), mm 483 x 88.1 x 421.5
Weight 17.7 kg (39.0 lbs)
Signal Processing LPN, switchable
Optional Accessories Rear-rackmount D113223 (RMK-15)

Share Product :

Facebook
Twitter
Pinterest
LinkedIn
WhatsApp

Payment Support :

Description

Dynacord     

 

Dynacord SL 2400 2 x 1200 w Power Amplifier

 

Solid Dynacord amplifier technology at highly competitive prices.

These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.

The integrated, switchable Low-Pass Notch filter (a typical Dynacord special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

SPECIFICATIONS

Load Impedance 2 Ω 4 Ω 8 Ω
Maximum Midband Output Power THD = 1%, 1 kHz, Dual Channel 1800 W 1200 W 750 W
Rated Output Power THD < 0.1%, 20 Hz to 20 kHz 1100 W 550 W
Maximum Single Channel Output Power Dynamic-Headroom, IHF-A 3400 W 1800 W 950 W
Maximum Single Channel Output Power Continuous, 1 kHz 2400 W 1500 W 850 W
Maximum Bridged Output Power THD = 1%, 1 kHz 3600 W 2400 W

SPECIFICATIONS

Maximum RMS Voltage Swing THD = 1%, 1 kHz 90.6 V
Power Bandwidth THD = 1%, ref. 1 kHz, half power @ 4 Ω < 10 Hz to 30 kHz
Voltage Gain, ref. 1 kHz 32.0 dB
Input Sensitivity rated power @ 8 Ω, 1 kHz +6.6 dBu (1.66 Vrms)
THD at rated Output Power MBW = 80 kHz, 1 kHz < 0.03%
IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
DIM30, 3.15 kHz, 15 kHz < 0.05%
Maximum Input Level +21 dBu (8.69 Vrms)
Crosstalk ref. 1 kHz, at rated output power < -80 dB
Frequency Response, ref. 1 kHz 10 Hz to 40 kHz (±1 dB)
Input Impedance, active balanced 20 ㏀
Damping Factor, 1 kHz > 300
Slew Rate 30 V/μs
Signal to Noise Ratio A-weighted > 110 dB
Output Noise, A-weighted < -71 dBu
Output Stage Topology Class H
Power Requirements 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption 1/8 maximum output power @ 4 Ω 850 W
Mains Fuse 240 V / 230 V: T15AH; 120 V / 100 V: T30AH
Protection Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
Cooling Front-to-rear, 3-stage-fans
Ambient Temperature Limits +5 °C to +40 °C (40 °F to 105 °F)
Safety Class I
Dimensions (W x H x D), mm 483 x 88.1 x 421.5
Weight 17.7 kg (39.0 lbs)
Signal Processing LPN, switchable
Optional Accessories Rear-rackmount D113223 (RMK-15)

 

 

 

Explore our extensive range of products, including the Dynacord IPX 20.4 Multi‑Channel Installation Dsp Class‑D Amplifier

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Open chat
Hello 👋
How Can We help You?