Volume Music Solutions | Call: 0128 0853640 | Email: info@volumemusicsolutions.co.uk

NEXT AUDIOCOM 4 X T8 8″ IP65 SPEAKER,BLACK [100V|16Ω] AD500 4-CHANNEL AMPLIFIER WITH DSP [100V|8Ω]

Next Audiocom NEXT AUDIOCOM 4 X T8 8" IP65 SPEAKER,BLACK [100V|16Ω] AD500 4-CHANNEL AMPLIFIER WITH DSP [100V|8Ω]

NEXT AUDIOCOM 4 X T8 8″ IP65 SPEAKER,BLACK [100V|16Ω] AD500 4-CHANNEL AMPLIFIER WITH DSP [100V|8Ω]

 

Share Product :

Facebook
Twitter
Pinterest
LinkedIn
WhatsApp

Payment Support :

Description

Next Audiocom NEXT AUDIOCOM 4 X T8 8" IP65 SPEAKER,BLACK [100V|16Ω] AD500 4-CHANNEL AMPLIFIER WITH DSP [100V|8Ω]

NEXT AUDIOCOM 4 X T8 8″ IP65 SPEAKER,BLACK [100V|16Ω]  AD500 4-CHANNEL AMPLIFIER WITH DSP [100V|8Ω]

 

The T8 two-way IP65 loudspeakers with built-in 100V transformer and 16Ω power tap are perfect for both distributed and near-field applications in environments such as retail stores, restaurants, bar terrace, churches, malls or conferences. The speakers are housed in a stylish weatherproof plastic cabinet (IP65 – using the back cover) providing an excellent architectural integration, both indoor and outdoor. The very accurate speaker’s coverage allows the people, among the audience, to perceive the sound in the same way. The low frequencies are reproduced by a 8” direct-radiating woofer with a polypropylene cone, while the high-frequency section is based on a titanium tweeter. A U-bracket is included and will support your installation on the wall or ceiling.
NEXT-Audiocom-T8-banner
U-BRACKET INCLUDED
The T8 comes with a U-Bracket included on the packaging, made from Steel with a Hot-dip Galvanization, coating the steel with a layer of zinc, turning it resistant to corrosion. Other wall brackets (with pan and tilt) are available for T8 speakers.
NEXT-Audiocom-T8-Product
NEXT-Audiocom-T8-Context
VERSATILE INSTALLATIONS
The T8 speakers are an excellent solution to sound your installation such as retail stores, restaurants, bar terraces, churches, malls or conferences among others.
NEXT-Audiocom-T8-Detail
ADJUSTABLE BRACKET
Install your T8 speakers easily, adjusting the wall bracket and positioning in the desired position.
EASY CONNECTIONS
The T8 speakers are equipped with a 4-positions (IN+/IN- and LINK+/LINK-) Phoenix connector located on the back plate. The screw connector provides a faster and easier way to wire the system allowing the speaker to perfectly ¬fit the wall shape while keeps the cables invisible.
NEXT-Audiocom-T8-Detail-2
NEXT-Audiocom-T8-Detail-3
BACK PLATE FOR IP65
The T8 includes a back cover that permits the speaker to be exposed to rain or highly humid environments. Note: The IP65 rate can only be achieved when the back cover is in place.
All the T Series (T4, T6 and T8) is available in black and white to match the décor of your installation as you need.
NEXT-Audiocom-T8-Final-Banner

KEY FEATURES

icon
100V / 16Ω Input
The integrated transformer allows you to use the speaker at 100V line or low impedance 16Ω depending on the needs of your installation.
icon
Bracket Included
Easily install your speaker on the wall or ceiling using the included bracket.
icon
Easy Install
The installation is made easy with no high technical skills or very special tools needed to install your device.
icon
Ver./Hor. Installation
You can install your speaker on either horizontally or vertically, depending on your installation needs.
icon
Weatherproof
The IP65 rated enclosure offers an excellent performance for many environments, including outdoor areas, where the weather protection is needed.
icon
Available in Black or White
This product is available in both black or white colors. Please choose the product accordingly.

TECHNICAL SPECIFICATIONS

Product Type
2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB)
60Hz – 18kHz
Nominal Coverage (-6dB)
90° H x 50º V
RMS Power
150W
Program Power
300W
Nominal Impedance
16Ω (low impedance mode)
Sensitivity (1W, 1m)
94dB
Maximum SPL (calculated)
119dB
Transformer Taps 100V
37.5W | 75W | 150W
Low Frequency Driver
8″ Woofer
High Frequency Driver
1″ Driver
Input Connectors
4 Pins Screw Connector (IN/OUT)
Recommended Amplifier
Grille
Aluminum Acoustically Invisible
Construction
Weatherproof Plastic Cabinet
IP Rating
IP65
Dimensions (WxHxD)
240 x 450 x 287mm (9.4 x 17.7 x 11.3 in)
Fixation
Wall U-Bracket (included)
Net Weight
10.7kg (23.6lb)
Shipping Weight
12.2kg (26.9lb)

AD500

4-CHANNEL AMPLIFIER WITH DSP [100V|8Ω]

iconEasy Install
icon100V Line Output
iconSpeaker Zone Output
iconDedicated Presets
iconSpace Saving
icon4Ω Minimum Imp.
The AD500 is a 4 x 125 W Class D multi-purpose installation amplifier in 1RU half rack unit with flexible power distribution among its four output channels power sharing up to 250W per channel driving both conventional low impedance (4Ω to 16Ω) loudspeakers and high impedance (70V/100V) transformer coupled loudspeakers or any mix of the two. The on board, state-of-the-art, full matrix, DSP engine can be configured to suit a wide range of tasks, without the need for additional equipment, to drive a wide range of loudspeaker systems. Everything you need is right there. The close integration of processing and amplification allows the DSP to monitor and better adapt to amplifier behavior, making dynamics processing far more accurate and effective than that typically achieved with separate components. The active PFC (Power Factor Correction) power supply technology enables universal AC mains operation and delivers consistent, regulated power worldwide.
NEXT-Audiocom-AD500-Banner
INTEGRATED WEB INTERFACE
The AD500 can be accessed anytime, anywhere through Wi-Fi via a built-in Wireless-Access-Point (WAP) or through ethernet for simple connection easy configuration, controlling and powering any speaker system, creating the most impressive multi-zone sound system in minutes. An easy-to-use web-based interface allows remote control of all DSP functions as well as monitoring of all amplifier vital functions from any PC, tablet, or smartphone, regardless of operating system. No software to install (it’s built into the AD500). Simply connect via the Ethernet port or the built-in Wi-Fi, and you’re ready to go.
NEXT-Audiocom-AD500-Software
NEXT-Audiocom-AD500-Back
OUTPUTS
Software-selectable multi-mode operation with switchable Normal Low Z (4Ω to16Ω) or Bridge Hi Z (70V/100V) allows you to mix and match speaker types as needed.
DIGITAL
The SPDIF Digital I/O can connect to other compatible equipment or bridge two AD500 amplifiers to digitally expand the system.
GPIO
Five programmable GPIO pins are provided as additional control lines. These pins can be programmed to remotely control the volume levels for each Zone by means of external remote potentiometers. Power On/Off, Standby and Mute are also remotely controllable via GPIO.
POWER SHARING
Power Sharing technology distributes dynamically the available power between each channel pair, so that it can be used where it is needed the most, maximizing the efficiency of the system. This technology allows a single channel to run at double-power, 250W (B), or balance power asymmetrically between channels, for example 200W+50W (C), to meet different load requirements. Other combinations are possible (A, B) offering maximum flexibility for the installer.
NEXT-Audiocom-AD500-Power
DSP PROCESSING
The integrated web interface controls a powerful signal processing engine extending the level of functionality. The state-of-the-art full matrix Digital Signal Processing (DSP) can be configured to suit a wide range of tasks, without the need for additional equipment. From processing input sources, managing up to 4 zones, correcting up to 4 independent rooms, to fine-tuning 4 speaker outputs, all the powerful processing tools you need are here.
NEXT-Audiocom-AD500-DSP
RECOMMENDED APPLICATIONS:
Conference Rooms, Retail Stores, Hotel Lobbies, Inside Displays & Kiosks, Bars and Restaurants, Trade Show Exhibits, Auditoriums, Museums, Theatres, Fitness and Leisure centers, Houses of worship

KEY FEATURES

icon
Easy Install
The installation is made easy with no high technical skills or very special tools needed to install your device.
icon
100V Line Output
Use this amplifier to power, with flexibility, medium to big system configurations with 100V line speakers.
icon
Speaker Zone Output
The Speaker Zones Output allows you to control independently the volume level of different areas of your installation.
icon
Dedicated Presets
The integrated DSP allows you to have dedicated presets for different situations. You just need to select which one is the most convenient for your application.
icon
Space Saving
The available space is always a concern. Thanks to its compact size, you can save space on your devices installation.
icon
4Ω Minimum Imp.
To increase the number of speakers connected to a single amplifier channel, you can use your amplifier down to 4Ω.

TECHNICAL SPECIFICATIONS

Product Type
Class D Amplifier with DSP
Frequency Response
20Hz – 20kHz (+0 / -0.25dB)
Amplifier Technology
UMAC Class D – Full Bandwidth PWM Modulator With Ultra-Low Distortion
Number of Amplifier Channels
4 Channels Low Impedance (LoZ) / 2 Channels High Impedance (HiZ)
Amplifier Power – Stereo 8Ω
4 x 125W
Amplifier Power – Stereo 4Ω
4 x 125W
Amplifier Power – 100V
2 x 250W
Amplifier Power – 70V
2 x 250W
Speaker Output
4Ω – 16Ω | 70V | 100V
Zones Output
4-Zones Output
THD+N
<0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
SNR (Signal to Noise Ratio)
>106dB (A-weighted, 20Hz-20kHz, 8Ω load)
Output Voltage
70Vp / 140Vpp (unloaded) | Bridged 140Vp / 280 Vpp (unloaded)
DSP Technology
Ultimate DSP with WI-FI and Ethernet Connection
DSP Adjustable Parameters
Filters: PEQ, FIR, hi/lo-shelving, all-pass, band-pass, hi/lo-pass | Limiters: RMS Voltage, Peak Voltage | GPIO Functions | Routing
DSP Presets
Allows to Store and Load Individual Presets as well as Preset Libraries
Delay Adjustment
100ms (34.3m) per Output
Control Type
Controlled Via Webpage – Compatible with Desktop, Tablet and Mobile Phone (Wireless or Cable 1 x RJ45)
Wireless Connection System
Works as a WI-FI Access Point (WAP) or WI-FI Client
Audio Signal Inputs
4 x Analog Unbalanced Inputs | 4 x Analog Balanced Inputs | Stereo S/PDIF
Input Connectors
4 x RCA | 2 x 6-Pole 3.5mm Phoenix Type | 1 x RCA | 8 x GPIO
Audio Signal Outputs
Stereo S/PDIF
Output Connectors
1 x RCA | 8 x GPIO
Speakers Output Connectors
2 x 4-Pole 5mm Phoenix Type
Protections
Short Circuit, DC, Undervoltage, Temperature and Overload Protection
Operating Temperature Range
0ºC – 40ºC
Cooling Type
Speed Controlled Fan
Power Supply
UREC Universal Mains Switch Mode Power Supply (SMPS) with Power Factor Correction (PFC) and Standby Converter
Power Input
AC 100V – 240V 50Hz/60Hz
Mains Connector
Standard IEC socket
Power Consumption
150W
Special Features
GPIO Functions: Standby, Mute, Volume Control, Trigger IN, Trigger OUT
Dimensions (WxHxD)
44 x 220 x 319mm (1.7 x 8.7 x 12.6 in)
Fixation
1U 19″ Rack Mount | Wall / Desktop Mount (Necessary Accessories Not Included)
Net Weight
2.8kg (6.2 lbs)
Shipping Weight
3.5kg (7.7 lbs)
Accessories
19″ Rack Mount Kit | Wall / Desktop Mount Kit (not included)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Open chat
Hello 👋
How Can We help You?