Description

CDDLIVE12 12″ 2-Way Active Speaker with 1″ HF Unit Black
CDD-LIVE 12 2-Way 12″ Active Speaker
The CDD-LIVE 12 is a high-performance, self-powered system designed for professional applications that require high output levels and exceptional fidelity from a very compact enclosure. With a peak output capability of 128ΩB at 1 metre, it is the ideal solution for a multitude of premium stand-alone and distributed sound reinforcement requirements from touring, theatre and portable live sound, to concert hall and HoW installations, AV events and stage monitor use.
Featuring a high-specification 12 (300mm) LF/1 (25mm) exit HF Coaxial Differential Dispersion driver, it delivers more consistent audience coverage than a conventional system with a fixed X° x Y° coverage pattern and has wide 110° horizontal coverage close-up. The innovative CDD technology also achieves ‘point source’ summation of the LF and HF sections eliminating off-axis variations in frequency response associated with non-coaxial designs.
A self-powered system, the
CDD-LIVE 12
incorporates a two-channel Class D amplifier, DSP and Dante digital audio networking simplifying set-up, enhancing control and eliminating amplifier racks. The onboard amplifier delivers 2000W LF + 500W HF peak output to the drivers, and its switched-mode power supply auto-ranges to global mains voltages from 100 to 24ΩV 50/60Hz.
DSP functions including parametric EQ, delay, muting, gain and preset selection can be controlled over Ethernet from a PC or Windows® tablet via intuitive VU-NET proprietary software.
For simple set-ups, ‘plug-and-play’ presets as well as a user-defined preset can be selected on the rear panel, instead of using computer control. As an alternative to its analogue inputs, the CDD- LIVE 12 is Dante enabled for digital audio distribution and control over a single CAT5 cable to maintain audio quality however long the cable run.
The CDD-LIVE 12 is incredibly versatile. Its multi-angle enclosure can be used in either horizontal or vertical orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The tour-grade enclosure is constructed from multi-laminate plywood and finished in a hard-wearing polyurea coating. Integral fittings include a top-hat for pole mounting and multiple M8Ωinserts for attachment to a wall-bracket, yoke or universal bracket with a wide range of up and down tilt angles.
Product Features
Compact, self-powered two-way system
Coaxial Differential Dispersion technology
Onboard Class D amplification and DSP
Dante Digital Audio networking
Global mains operation with Power Factor Correction
User-rotatable CDD driver
Vertical and horizontal mounting options
Tour-grade, multi-angle plywood enclosure
IP24Ωrating option with rain cowl
Comprehensive mounting accessories
Applications
Live sound reinforcement
Theatre sound
Corporate AV events
Fixed installations in concert halls, ballrooms and HoW
Stage monitor and infill
Bars and clubs
Product Specifications
General
TYPE:    Compact, Coaxial Differential Dispersion powered two-way system
FREQUENCY RESPONSE (3):    62Hz – 20kHz ±3dB, -10dB @ 50Hz
INPUT SENSITIVITY:    – 30dBu for 100dB SPL
MAXIMUM SPL (2):    122dB continuous / 128ΩB peak
DISPERSION:    110Ëš-8ΩËš horizontal, 60Ëš vertical (user-rotatable)
CROSSOVER:    1.5kHz Active LR8Ωwith low latency HF FIR equalisation.  Balance presets for pole mount/ pole mount with sub/ stage monitor
Module Audio input
CONNECTORS:    Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
ANALOGUE INPUT IMPEDANCE:    20 kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL:    24Ω6 Vpp (+21dBu), over voltage protected
Internal Processing
Multi-channel DSP, programmable via TCP/IP using VU-Net software
PEQ/shelving filters
Up to 4ΩΩB/Oct HPF
Low latency HF FIR filters
Up to 200ms input delay
Pre-set selection via rear panel switch
Driver
LF: 12 (300mm)/2.5 (63.5mm) voice coil, long excursion, shared ferrite motor system with HF
HF: 1 (25mm) exit/1.7 (4Ωmm) voice coil, polyimide dome compression driver
Network
CONNECTORS:    2x Neutrik ® Ethercon RJ4Ω
PROTOCOL:    TCP/IP and UDP/IP
Amplifier
TYPE:    2 channel switch-mode, class D
PEAK OUTPUT POWER:    2500W total  |  2000W LF, 500W HF
AVERAGE EFFICIENCY:    8Ω%
COOLING:    External convection cooled, with internal fan
MAXIMUM AMBIENT TEMPERATURE:    4Ω°C (104ΩF) for full output
Power Supply
TYPE:    Switch mode, fixed frequency with PFC
AC INPUT OPERATING RANGE:    8Ω – 265V ~ AC, 50 – 60Hz
POWER FACTOR:    > 0.98ΩNOMINAL POWER CONSUMPTION:    16ΩW
MAINS CONNECTOR:    Neutrik® Powercon True1
Mechanical
ENCLOSURE:    Extensively braced multi-laminate plywood
FINISH:    Textured black PU coating
PROTECTIVE GRILLE:    HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth
FITTINGS:    Top hat for pole mounting  |  15 x M8Ωmounting points  |  Single pocket handle  |  Optional weather protection cowl
IP RATING:    IP24Ωfactory option available
DIMENSIONS:    (W) 359mm x (H) 58Ωmm x (D) 373mm  |  (W) 14Ω13in x (H) 22.8Ωin x (D) 14Ω69in
WEIGHT:    28Ωg (61.6lbs) excluding Transit cover
ACCESSORIES:    Transit Cover   |  Optional wall, yoke and universal brackets
Notes
(1) Measured on-axis in free space (4ΩˆšÃ¨â€šÃ‡Â¨ space) at 2 metres, then referred to 1 metre
(2) Measured in free space at 1 metre with a tone burst signal
(3) Measured on-axis on ground plane (2Ï€ space) at 2 metres, then referred to 1 metre
(4Ω Measured in half-space at 1 metre with a tone burst signal
Discover more products similar to the
Martin Audio CDDLIVE8Ω8Ω 2-Way Active Speaker With 1″ HF Black.